Buffer solutions

This question is about acids and bases.

Nitric acid is a strong acid.

Calculate the pH of 0.150 mol dm^–3 nitric acid.

Give your answer to 2 decimal places.

Propanoic acid is a weak acid.

Calculate the concentration of a solution of propanoic acid with pH = 2.89 at 25 °C

The acid dissociation constant (K_a) for propanoic acid at 25 °C

A student records the pH as an alkali is added to an acid.

Figure 3 shows the pH curve for this reaction.

Which of these combinations gives the pH curve shown in Figure 3 ?

Different indicators change colour across different pH ranges.

Buffer solution B is made by dissolving 0.656 g of sodium ethanoate (M_r = 82.0) in 50 cm³ of 0.120 mol dm^–3 ethanoic acid.

This buffer solution has pH = 4.87

Explain, qualitatively, how this buffer solution resists pH change when a small amount of sodium hydroxide solution is added.

Calculate the pH change that occurs when 1.50 cm³ of 0.200 mol dm^–3 HCl(aq) are added to buffer solution B.

Give your answer to 2 decimal places.

The acid dissociation constant (K_a) for ethanoic acid at 25 °C is 1.78 × 10^–5 mol dm^–3

Figure 4 shows how the pH changes as 0.100 mol dm^–3 sodium hydroxide solution is added to 25.0 cm³ of 0.0800 mol dm^–3 aqueous propanoic acid at 298 K

Propanoic acid is a weak acid.

State the meaning of weak in this context.

Suggest why a student doing an experiment to produce the curve in Figure 4 would add the sodium hydroxide solution dropwise around the equivalence point.

Give an expression for K_a for propanoic acid (CH₃CH₂COOH).

Use this expression to show that pH = pK_a when half of the propanoic acid has reacted with sodium hydroxide.

Use the pH from Figure 4, when half of the propanoic acid has reacted, to calculate

When sodium hydroxide solution is added to aqueous propanoic acid, the solution formed acts as a buffer when between 5 cm³ and 15 cm³ have been added.

Explain why the pH stays approximately constant during this part of the experiment.

Methyl orange and universal indicator are not suitable indicators for the titration of solutions of propanoic acid with sodium hydroxide.

State the reason why each indicator is not suitable.

Universal indicator

This question is about weak acids.

Table 5 shows the pH ranges of some indicators.

Identify the indicator that is most suitable for use in a titration between propanoic acid and sodium hydroxide.

Give the expression for the acid dissociation constant (K_a) for propanoic acid

Calculate the pH of a 0.100 mol dm^–3 propanoic acid solution. Give your answer to 2 decimal places.

For propanoic acid, pK_a = 4.87

For butanoic acid, K_a = 1.51 × 10^–5 mol dm^–3

20.0 cm³ of 0.100 mol dm^–3 sodium hydroxide solution are added to 25.0 cm³ of 0.100 mol dm^–3 butanoic acid solution.

Calculate the pH of the solution formed.

A student plans to titrate butanoic acid solution with a solution of ethylamine.

Explain why this titration could not be done using an indicator.

Equal volumes of pairs of solutions are mixed.

Which pair forms a buffer solution?

This question is about acids and bases.

Calculate the pH of a 0.150 mol dm^–3 solution of ethanoic acid at 25^oC Give your answer to 2 decimal places.

For ethanoic acid, K_a = 1.74 x 10^–5 mol dm^–3 at 25^oC

Strontium is an element in Group 2.

Calculate the pH of a 0.0100 mol dm^–3 solution of strontium hydroxide at 10^oC You may assume that strontium hydroxide is completely dissociated in this solution.

At 10^oC the ionic product of water, K_w = 2.93 x 10^–15 mol² dm^–6

The pH of a barium hydroxide solution is lower at 50 °C than at 10 °C

At 50 °C a 25 cm³ sample of this barium hydroxide solution was neutralised by 22.45 cm³ of hydrochloric acid added from a burette.

Deduce the volume of this hydrochloric acid that should be added from a burette to neutralise another 25 cm³ sample of this barium hydroxide solution at 10 °C

Explain your answer

State how a buffer solution can be made from solutions of potassium hydroxide and ethanoic acid.

Give an equation for the reaction between potassium hydroxide and ethanoic acid.

State how this buffer solution resists changes in pH when a small amount of acid is added.

How buffer solution is made

Equation

How buffer solution resists pH change

A buffer solution is made by adding 2.00 g of sodium hydroxide to 500 cm³ of 1.00 mol dm^–3 ethanoic acid solution.

Calculate the pH of this buffer solution at 25 °C

Give your answer to 2 decimal places.

For ethanoic acid, K_a = 1.74 x 10^–5 mol dm^–3 at 25 °C

A mixture of methanoic acid and sodium methanoate in aqueous solution acts as an acidic buffer solution.

The equation shows the dissociation of methanoic acid.

Calculate the mass, in g, of sodium methanoate (HCOONa) that must be added to 25.0 cm³ of 0.100 mol dm³ methanoic acid to produce a buffer solution with pH = 4.05 at 298 K

For methanoic acid, pK_a = 3.75 at 298 K

Assume that the volume of the solution remains constant.

Propanoic acid (C₂H₅COOH) is a weak acid.

The acid dissociation constant (K_a) for propanoic acid is 1.35 × 10^–5 mol dm^–3

State the meaning of the term weak acid.

Give an expression for the acid dissociation constant for propanoic acid.

A student dilutes 25.0 cm³ of 0.500 mol dm^–3 propanoic acid by adding water until the

Calculate the pH of this diluted solution of propanoic acid.

Give your answer to 2 decimal places.

A buffer solution with a pH of 4.50 is made by dissolving x g of sodium propanoate (C₂H₅COONa) in a solution of propanoic acid. The final volume of buffer solution is 500 cm³ and the final concentration of the propanoic acid is 0.250 mol dm^–3

Calculate x in g For propanoic acid, K_a = 1.35 10^–5 mol dm^–3

This question is about different pH values.

For pure water at 40 °C, pH = 6.67 A student thought that the water was acidic.

Explain why the student was incorrect.

Determine the value of K_w at this temperature.

Sodium hydroxide solution was added gradually from a burette to 25 cm³ of 0.080 mol dm^–3 propanoic acid at 25 °C The pH was measured and recorded at regular intervals.

The results are shown in Figure 4.

Use Figure 4 to determine the value of K_a for propanoic acid at 25 °C

Show your working.

Suggest which indicator is the most appropriate for the reaction in Question 09.2 ? Tick (✓) one box.

Indicator	pH range	Tick () one box
methyl orange	3.1 – 4.4
bromothymol blue	6.0 – 7.6
cresolphthalein	8.2 – 9.8
indigo carmine	11.6 – 13.0

A student prepared a buffer solution by adding 0.0136 mol of a salt KX to 100 cm³ of a 0.500 mol dm^–3 solution of a weak acid HX and mixing thoroughly.

The student then added 3.00 × 10^–4 mol of potassium hydroxide to the buffer solution.

Calculate the pH of the buffer solution after adding the potassium hydroxide.

For the weak acid HX at 25 °C the value of the acid dissociation constant,

Give your answer to two decimal places.

A buffer solution has a constant pH even when diluted.

Use a mathematical expression to explain this.

Hydrochloric acid is a strong acid and ethanoic acid is a weak acid.

State the meaning of the term strong acid.

In an experiment, 10.35 cm³ of 0.100 mol dm^–3 hydrochloric acid are added to 25.0 cm³ of 0.150 mol dm^–3 barium hydroxide solution.

Calculate the pH of the solution that forms at 30 °C

Give your answer to 2 decimal places.

The pH of water at 30 °C is 6.92

Give the reason why water is neutral at this temperature.

Identify the oxide that could react with water to form a solution with pH = 2

Tick (✓) one box.

Give the expression for the acid dissociation constant (K_a) for ethanoic acid

A buffer solution contains 0.025 mol of sodium ethanoate dissolved in 500 cm³ of 0.0700 mol dm^–3 ethanoic acid at 25 °C A sample of 5.00 cm³ of 2.00 mol dm^–3 hydrochloric acid is added to this buffer solution.

Calculate the pH of the solution formed.

For ethanoic acid, K_a = 1.76 × 10^–5 mol dm^–3 at 25 °C